the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

08 escape locks/disarm?


Post ReplyPost New Topic
< Prev Topic Next Topic >
todds440 
Member - Posts: 48
Member spacespace
Joined: December 29, 2006
Location: United States
Posted: February 15, 2008 at 7:17 AM / IP Logged  
Doing R/S install in the coming weeks on a 08 Escape.  Previous years you could tie doorlocks and arm/disarm at the the same point and use double pulse on your unlock/lock.  For those of you that have done o8's whats the easiest way to do locks and disarm??  Thanks
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: February 15, 2008 at 9:02 AM / IP Logged  

To lock and arm you trigger the wires that connect to the push pad on the outside of the door. 7/8 9/0    YELLOW /GREEN, PURPLE / green. Triiger at the same time diode isolate.  drivers kick harness

Disarm ..... PURPLE / brown. drivers kick harness    Unlock is yellow/purple  drivers kick harness or SJB .   ALL are negative.

todds440 
Member - Posts: 48
Member spacespace
Joined: December 29, 2006
Location: United States
Posted: February 15, 2008 at 11:41 AM / IP Logged  
Thanks for the info.  For those of you that have done one .  How hard?  Any tricks?  thanks.
mikvot 
Gold - Posts: 1,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 19, 2006
Location: Missouri, United States
Posted: February 15, 2008 at 5:25 PM / IP Logged  

Easy vehicle to do. Done quite a few remote starts, and probably 50 alarms on these and never seen one with a factory alarm.

todds440 
Member - Posts: 48
Member spacespace
Joined: December 29, 2006
Location: United States
Posted: February 15, 2008 at 6:13 PM / IP Logged  
Do any of the 08's that youve done have a GEM module?  Or has Ford done away with this setup?  The reason I ask  is all of the wiring info for the 08 escape doesn't mention a Gem module.  Which Pats bypass are you using?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer