the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 silverado, autopage remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
gixxerboyz 
Member - Posts: 14
Member spacespace
Joined: December 04, 2007
Location: Illinois, United States
Posted: November 16, 2008 at 8:55 PM / IP Logged  
i just did a remote start on an 08 using an AutoPage rs and DEI 1701G module. i had to use a relay and add a couple resistors. it seemed to work just fine, now the next day it will not start. it cycles like it should but never cranks. everything else works fine, door locks etc, starts with the key no problem there. HELP!! im stuck. i used the wiring diagram from this website and followed it. what am i doing wrong??
gixxerboyz 
Member - Posts: 14
Member spacespace
Joined: December 04, 2007
Location: Illinois, United States
Posted: November 17, 2008 at 5:43 PM / IP Logged  
so now this morning it worked.  what is going on????
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 17, 2008 at 6:44 PM / IP Logged  
My first thought is the resister value on the starter wire is incorrect....
Mike M2
Tech Manager
CS Dealer Services
gixxerboyz 
Member - Posts: 14
Member spacespace
Joined: December 04, 2007
Location: Illinois, United States
Posted: November 17, 2008 at 8:22 PM / IP Logged  
what watts should the resistors be?? 1/4,1/2 or 1 watt??
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 17, 2008 at 9:24 PM / IP Logged  
Wattage is unimportant in this application. The Ohm value is what you need correct, which is 1280....
Mike M2
Tech Manager
CS Dealer Services
gixxerboyz 
Member - Posts: 14
Member spacespace
Joined: December 04, 2007
Location: Illinois, United States
Posted: November 17, 2008 at 9:26 PM / IP Logged  

Mike M2 wrote:
Wattage is unimportant in this application. The Ohm value is what you need correct, which is 1280....

it called for 9.6k and 6.3k, i used 1/4 watt resistors

Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 18, 2008 at 6:36 AM / IP Logged  

Sorry, forgot you are using a 1701G and the directions it comes with, they call for 9.6 on the start and 6.3 on the accessory. Avox has another method using just one resistor at 1280.

If you are not using the correct value(say you are off 10% or more) it will do what you describe. The 1/4 resistors are fine...

Mike M2
Tech Manager
CS Dealer Services
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: November 18, 2008 at 5:27 PM / IP Logged  
check for loose connections
harlin 
Member - Posts: 2
Member spacespace
Joined: January 22, 2009
Location: Wisconsin, United States
Posted: January 24, 2009 at 12:23 PM / IP Logged  

autopage either remote wont work after starting car but lcd beeps when run time done

any ideas?????????

harlin 
Member - Posts: 2
Member spacespace
Joined: January 22, 2009
Location: Wisconsin, United States
Posted: January 24, 2009 at 12:26 PM / IP Logged  
harlin wrote:

autopage either remote wont work after starting car but lcd beeps when run time done

any ideas?

sorry posted in wrong spot...
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer