the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

02 nissan frontier remote start issue


Post ReplyPost New Topic
< Prev Topic Next Topic >
eksessiv audio 
Member - Posts: 16
Member spacespace
Joined: August 28, 2007
Location: United States
Posted: July 30, 2009 at 8:45 PM / IP Logged  

When I autostart the vehicle, then put the key in the ignition and turn to the on position, the starter engages?  and when I turn it back  off in remote start mode, it engaes as well.

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: July 30, 2009 at 9:03 PM / IP Logged  
You need to isolate the starter wire with a relay!
eksessiv audio 
Member - Posts: 16
Member spacespace
Joined: August 28, 2007
Location: United States
Posted: July 30, 2009 at 9:13 PM / IP Logged  

I ran the second starter wire through a relay and i disconnected that one and it still did it.... How would I wire the relay???  does it go to the original starter wire???

t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: July 30, 2009 at 10:37 PM / IP Logged  

what type of system are you using? here's a general fix! using a relay wire like this

pin 30- cut true starter wire in half and key side connects here

pin 87a- other side of starter wire

pin 86- ignition

pin 85- ground while running wire (assuming your unit has one),

if you are using a dei module with the xcrs, let me know!

commit your way to jehovah and he will act in your behalf. psalms 37:5
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: July 31, 2009 at 9:10 AM / IP Logged  
Using t&t's example.... connect the remote start to the wire on 87a (that half of the cut starter wire)

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer