dei 530t driver lock button

Hello, I just installed the module in my car (nissan patrol, not sold in us) The module is working fine it roll the windows up and down fine. The problem i have is the lock button on my side is not working, so any passenger can roll the windows down (kids) and i think is very unsecured. Does anyone knows a way around this? My friend who installed it said it was connected as stated in the manual.

The only way round this would be either to rewire the lock button to switch one of the motor switch side wires going to the passenger windows. Or place a separate switch somewhere to do the same for the other three windows, 1 switch, 3 x relays.

Let me see if i got it... option 1 is to use the switch on the drivers door to control only 1 of the modules right? The 2nd option is to use 3 relays 1 for each door and control them with the drivers door switch? If i do option 1 or 2 will they also work when the alarm roll them up or down regardless of the switch position? Thank you for your answer.

Just thinking this through, see what the lock button does, but I think it's unworkable in the sense that if you get the lock button to work you will lose the arm+window close facility.