Loking for LED step cutter

Home / the12volt's Install Bay / Car Security and Convenience / Loking for LED step cutter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Car-Stuff

Member - Posts: 26

Joined: March 02, 2003

Location: United Kingdom

Posted: April 06, 2003 at 10:42 AM / IP Logged

I have started to use some DEI products and the LED in of a size that I cannot find a step cutter for. The LED needs a hole of 5/32. I have bought some drils of the correct size but I much prefer to use a step cutter.

What do you guys use??

Thanks

Nick

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 06, 2003 at 10:30 PM / IP Logged

Unibit #1, and pretty sure dei is 9/32.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: April 06, 2003 at 10:38 PM / IP Logged

Yes, my Unibit has a 9/32" step on it as well.

Also, if you lay a DEI LED sideways against a bench grinder for a moment, the outer plastic housing will come off, revealing the small glass LED inside. For a stealth look, you can drill a 1/8" hole, push the bare LED in from behind, and glue in place if necessary. It will still light up red, even without the housing.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Loking for LED step cutter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.