xk532 dodge caliber, 2008 horn beep

Home / the12volt's Install Bay / Car Security and Convenience / xk532 dodge caliber, 2008 horn beep (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rickhype

Member - Posts: 4

Joined: September 23, 2009

Posted: December 25, 2009 at 12:01 AM / IP Logged

I am getting ready to install a remote start on a 2007 dodge caliber and have an extra xk532 bypass module for it. I just installed the same module on my wifes 2008 dodge avenger. so I am looking on -line trying to see if this module will work for the 2007 dodge caliber. it's doesn't really say if it will work for that make and model car but it's says that the pku-ch2x will work. I was told a while ago that the pku-ch2x and the xk532 are the exact same module. just wanted some help on that issue

another issue. on my wife's 2008 dodge avenger, I finally got the remote start working and everthing is as it should be except that when she remote starts the car, the horn has about a 2 second long beep when it gets ready to start. I have a new born baby and don't want him to wake up while she is warming up the car. can anyone help to get rid of this annoying beep when her car starts. thanks

Rick

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: December 25, 2009 at 12:54 AM / IP Logged

my charts say it is compatible with the caliber with the CHDL7 Firmware

as for the 08 all i get it that the xk532 will not disarm the factory alarm for remote start.

it says to unlock and relock the doors or a pulse before start on the PURPLE / brown wire in the ignition harness with a negative 8.5 Kohms resistor. that if it disarms on placing the key into the ignition and a 1.47 Kohms if you have to turn the key

hope that helps

also note that if the horn honk with the factory fob it will honk with the xk532 when locking, unlocking the doors. if the starter is locking the door after start. that might be part of the honking.

i am sure there is a way to turn off the honking with door locking, but am not sure not dodge. look in the manual you might be able to turn it off.

i think i would try that first.

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: December 25, 2009 at 1:13 AM / IP Logged

here are some directions for turning off the horn honks and some say that stoped theres from honking on remote start

hereare the keyless entry steps that turned my horn honk off on the first try....

1) press and hold the LOCK button on the key for atleast 4 seconds, but less than 10 seconds

2) Continue to hold the LOCK button and then press the PANIC button while continuing to hold the LOCK button

3) Release both buttons at the same time

This process can be used to turn it off or on, just repeat the steps. If you accidentally set off the horn during this process by pressing PANIC, press it again to turn it off.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

xk532 dodge caliber, 2008 horn beep

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.