the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

trunk to relay, to not to relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
bgraper 
Member - Posts: 27
Member spacespace
Joined: November 16, 2008
Location: Ontario, Canada
Posted: December 26, 2009 at 11:52 PM / IP Logged  
Putting a starter in a 2001 Alero, the trunk release is a negative trigger.
The remote start has a 500mA Output for a relay trigger for the trunk.
The wire itself (for the trunk release in the vehicle wiring harness), is quite small 16-22 gauge.
Is this wire to trigger a relay down the line? Is my 500mA output from the remote start enough or do I need to trigger a negative signal with a relay?
05gt 
Silver - Posts: 628
Silver spacespace
Joined: October 30, 2005
Location: British Columbia, Canada
Posted: December 27, 2009 at 12:19 AM / IP Logged  
as long as it is a negative output you will be fine to connect that directy to the wire in the car
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: December 27, 2009 at 5:48 PM / IP Logged  
Something someone taught me a long time ago is what I use to determine whether or not a relay is required.
Find the proper wire using your DMM, once you have the proper wire take an old fashioned bulb test light to the wire. Hook the ground clip of the test light to ground and tap the wire with the probe end of the test light. If the device activates you do not need a relay, if it doesn't activate you need one.
Installer, IT support, and FFL. I need less hobbies.
05gt 
Silver - Posts: 628
Silver spacespace
Joined: October 30, 2005
Location: British Columbia, Canada
Posted: December 27, 2009 at 8:56 PM / IP Logged  
thats a good point, you learn something new everyday, lol
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: December 27, 2009 at 9:06 PM / IP Logged  
Understand the thought there. Truth is, if it's before a factory relay it mA output will activate it.
Mike M2
Tech Manager
CS Dealer Services
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 28, 2009 at 3:24 AM / IP Logged  
Thank you 12voltz! Do you non-believers in my desires to keep using Mr. Snap-On now realise what I'm preaching when I say use their bulb tester to trigger locks etc? Even if that bloody bulb costs $5 here

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer