program remote, remote starter

Home / the12volt's Install Bay / Car Security and Convenience / program remote, remote starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

redz250fz

Member - Posts: 7

Joined: January 15, 2010

Location: Ontario, Canada

Posted: January 15, 2010 at 11:42 AM / IP Logged

i replaced the remote on my remoter starter for my 2004 elantra and im having trouble programming it... i found the hoodpin switch (i think) and i pressed it and nothing happend can anyone help?????..... i wass also reading a post on here from a guy a couple years ago and he was saying that you can ground it out with a grey wire or something like that..?

Mr. Yorke

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 15, 2010 at 10:02 PM / IP Logged

Need to know the make and model of the rmeote starter or alarm system that you have.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

redz250fz

Member - Posts: 7

Joined: January 15, 2010

Location: Ontario, Canada

Posted: January 15, 2010 at 11:42 PM / IP Logged

its a prostart 2000' two way remote start from Canadian Tire...i cant figure ou the flash hood pin switch part

Mr. Yorke

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 16, 2010 at 6:07 AM / IP Logged

there is a 5pin harness with black, purple. grey, orange and yellow. Take the grey wire and attach it to ground. Then use the button on the side of the unit

push it for 4 seconds, let go, press again and let go

turn the key in the ignition to run, then back off.

hold the lock button on your remote until the unit clicks 5 times.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

redz250fz

Member - Posts: 7

Joined: January 15, 2010

Location: Ontario, Canada

Posted: January 16, 2010 at 5:33 PM / IP Logged

ok thanks i'll give that a try

Mr. Yorke

redz250fz

Member - Posts: 7

Joined: January 15, 2010

Location: Ontario, Canada

Posted: January 17, 2010 at 1:29 PM / IP Logged

ok just tried it i removed the grey wire from the harness and pluged the harness back in i attached the grey wire to ground pushed the button on the unit for 4 seconds let it go pushed it again let it go turned the car on then offff took the key out held the LOCK button and nothing happend the remote makes a very faint buzzing sound thats it :S

Mr. Yorke

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

program remote, remote starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.