561r

Home / the12volt's Install Bay / Car Security and Convenience / 561r (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hondaclx2k1

Member - Posts: 11

Joined: December 21, 2007

Location: New York, United States

Posted: January 24, 2010 at 3:23 PM / IP Logged

I was wondering if there were any way to make it so that when you remote start a vehicle it automatically locks the doors. The car is a 95 Jeep Cherokee. Any help would be appreciated.

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: January 24, 2010 at 6:08 PM / IP Logged

Does the 561R have a ground while running wire, or a wire labeled status? If so, and there is no other provisions to lock the doors, you can do it with the Constant to momentary relay setup found under special applications under the relay information to the left of here. If nobody knows of a way to do it, I will post some info for you.

i am an idiot

Platinum - Posts: 13,674

Joined: September 21, 2006

Location: Louisiana, United States

Posted: January 24, 2010 at 6:09 PM / IP Logged

Relays directly to the left of this post.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 24, 2010 at 6:38 PM / IP Logged

This unit has the standard DEI green and blue lock outputs, it's there in the owner's manual if I remember right that vehicle uses pos. pulses to trigger the lock/unlock relays which are in a relay box under dash or at the DKP. To the first poster you should have accessed the installation guide.

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 24, 2010 at 8:25 PM / IP Logged

Does the 561R have a GREEN / WHITE "factory rearm" wire?

If it does, I believe that wire makes an output just after starting, and also after remote start shutdown.

You should be able to use the GREEN / WHITE to trigger a relay, to make a positive trigger, to lock the Jeep's doors.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

561r

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.