the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 focus lock/unlock wires pkall issue


Post ReplyPost New Topic
< Prev Topic Next Topic >
kdswys 
Member - Posts: 19
Member spacespace
Joined: January 30, 2009
Location: Kansas, United States
Posted: February 09, 2010 at 9:57 AM / IP Logged  
Anybody got good wire info on 2010 ford focus, I can't find a negative trigger wire for lock/unlock only 12v wires for lock/unlock (both show 12volt when lock/unlock button pressed) guess I might have to use relay's but just curious as diagram on this site shows negative door locks for this car. Also pats plug on car does not match with picture in pkall manual and I can't get it to program so does anybody have wire colors for this? going to try a fortin key override all, had much better luck with those...
avistart 4103
pkall bypass (have fortin available though)
2010 ford focus se 2dr coupe
thanks
Kevin S
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 09, 2010 at 10:19 AM / IP Logged  

looking at the bottome of the fuse box, there is the SJB (smart junction box)

towards the right there is a grey 26pin plug

the wires you are looking for are

Lock - blue/green (-) pin 4
Unlock - yellow/purple (-) pin 6

the wires can also be found in the DKP in the loom from the door.

to test for this. DMM red to constant 12v. Black to wire you want to test.  Set dmm to 20vdc, meter will show 0v, and 12v when lock or unlock is dont by turning the key in the door or try the switch on driver door.

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
kdswys 
Member - Posts: 19
Member spacespace
Joined: January 30, 2009
Location: Kansas, United States
Posted: February 09, 2010 at 1:09 PM / IP Logged  
Thanks for the quick response, I will look for those wires.
which bypass do you use on these?, the pkall book shows a 4 pin
pats connector which I can't get to work... the omega book shows an
8 pin for 2010 focus, so I am a little confused here
thanks
Kevin S
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 09, 2010 at 5:03 PM / IP Logged  

not big on the xpresskits stuff. more of a fortin/idatalink user.

from my info, the transponder connector you are looking for is 4 pin @ ignition barrel

Pin 1 - ignition
Pin 2 - Ground
Pin 3 - TX
Pin 4 - RX

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
kdswys 
Member - Posts: 19
Member spacespace
Joined: January 30, 2009
Location: Kansas, United States
Posted: February 09, 2010 at 5:29 PM / IP Logged  
Thanks a bunch, I will try that out
Kevin S
flobee4 
Silver - Posts: 585
Silver spacespace
Joined: January 02, 2004
Location: United States
Posted: February 09, 2010 at 5:52 PM / IP Logged  
Doorlocks
2010 focus lock/unlock wires pkall issue -- posted image.
Transponder RX/TX wires
2010 focus lock/unlock wires pkall issue -- posted image.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 09, 2010 at 5:58 PM / IP Logged  

would DEI approve of this? 2010 focus lock/unlock wires pkall issue -- posted image.

ahah, pics make everything so much better.

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
kdswys 
Member - Posts: 19
Member spacespace
Joined: January 30, 2009
Location: Kansas, United States
Posted: February 09, 2010 at 8:50 PM / IP Logged  
That's awesome thanks!
Kevin S
kdswys 
Member - Posts: 19
Member spacespace
Joined: January 30, 2009
Location: Kansas, United States
Posted: February 11, 2010 at 8:50 AM / IP Logged  
PKall still will not program, I see in some of the threads here that some guy's say to hook up the gwr wire to r/s other threads say not to hook them up? The light on pkall comes on as soon as I hook up connector 1 and then stays on steady after that, no flashing at all just stay's solid no matter what I do... anymore advice offered would be much appreciated
thanks
Kevin S
kdswys 
Member - Posts: 19
Member spacespace
Joined: January 30, 2009
Location: Kansas, United States
Posted: February 11, 2010 at 9:16 AM / IP Logged  
Hey, Both transponder wires say RX? in that picture one of them should be TX right?
Kevin S
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer