the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

02 kia viper 5902 dei 530t


Post ReplyPost New Topic
< Prev Topic Next Topic >
sneakycyber 
Silver - Posts: 413
Silver spacespace
Joined: September 13, 2005
Location: United States
Posted: April 15, 2010 at 10:57 PM / IP Logged  
The problem I am having is when Triggering the 530T via channel one on the 5902 the windows usually roll all the way down instead of venting. The 5902 is set to Validity or Pulsed output and I have tried using a relay but it still pulses too long. The 530 T is set to max resistance I think some of the windows may be out of alignment. Any way to adjust the length of the pulsed output on the 5902 or the input of the 530T
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 16, 2010 at 1:43 AM / IP Logged  
Have you tried grounding that vent wire for a second or less to test that that's actually the problem?
sneakycyber 
Silver - Posts: 413
Silver spacespace
Joined: September 13, 2005
Location: United States
Posted: May 08, 2010 at 10:43 AM / IP Logged  
sorry for the late response got busy with finals and all. Yes I grounded the wire for a less then a second manually and it vented fine (i have 2 units for all 4 windows both act the same) but hooked to the alarm they sometimes roll down all the way on the first try its a crap shoot.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 12, 2010 at 5:27 AM / IP Logged  
Try one of the other aux channels that doesn't have a validity output?
sneakycyber 
Silver - Posts: 413
Silver spacespace
Joined: September 13, 2005
Location: United States
Posted: May 12, 2010 at 5:35 AM / IP Logged  
bleh! Why didn't I think of that I will try the trunk or the other channels today if the weather cooperates.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 12, 2010 at 6:54 AM / IP Logged  
Not the RED / white trunk, it's a validity output, try testing one of the other aux outputs, set to pulse.
sneakycyber 
Silver - Posts: 413
Silver spacespace
Joined: September 13, 2005
Location: United States
Posted: May 12, 2010 at 10:19 AM / IP Logged  
The weather didn't cooperate today. However according to the programming section of the install manual the options for AUX 1-4 are Validity, latch, latch reset/ign, with different linking options on each channel. Don't see a pulsed.. but according to DEI validity is pulsed. *scratches head*
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 12, 2010 at 12:25 PM / IP Logged  
Hate that bloody validity, (original) Clifford and I believe Compustar are INSTANT!
blanx218 
Silver - Posts: 654
Silver spacespace
Joined: September 23, 2008
Location: Pennsylvania, United States
Posted: May 12, 2010 at 2:20 PM / IP Logged  
Validity is how long the button is pressed on the transmitter. you can set it to be a timed output but need a bitwriter to change the timed output from 30 seconds to 1 second. that might work for you
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 12, 2010 at 5:10 PM / IP Logged  
Yes that's fine, I thought of that but what if you want to completely open the windows?
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer