dei 524t to dei 451m to viper 5901

Home / the12volt's Install Bay / Car Security and Convenience / dei 524t to dei 451m to viper 5901 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rtenuso

Member - Posts: 3

Joined: September 10, 2008

Location: California, United States

Posted: May 03, 2010 at 3:29 AM / IP Logged

Okay, I must start off by saying thanks to the 12volt community. There is some much helpful info and people on here. I am in need of a little more help and I hope someone can shed some light as I am installing my first R/S with aftermarket actuators.

I have 2 dei 524t actuators which only has 2 wire each, green and blue. I got a dei 451m to help install these, but i am a little bit confused with the 451m. Is this the way i should hook up everything?

dei 524t to dei 451m to viper 5901 -- posted image.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 03, 2010 at 5:17 AM / IP Logged

Yes and unless you're reversing the actuator travel, GREEN/ black to green on motor and blue/black to blue on motor.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei 524t to dei 451m to viper 5901

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.