viper 5901 and dei 524n

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 and dei 524n (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mdem2

Member - Posts: 4

Joined: August 02, 2010

Location: Maryland, United States

Posted: August 02, 2010 at 1:51 AM / IP Logged

To hook up the viper 5901 module to the 524n heavy duty actuators, do you need a relay? Ive heard of the 451m module, but was just curious if the 5901 has built in relays. The both have the blue/green wire, so I connected them, but the locks pulsate up and down real quick - no locking success.

Thanks!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 02, 2010 at 3:15 AM / IP Logged

451 needed or of course separate relays, see diagrammes on this site. Read the installation manual.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: August 02, 2010 at 1:40 PM / IP Logged

The locks pulsate when you connect directly to the unit? Yes you need a 451m, The open contacts are 20amps capable, so you may have to upgrade the 15 amp fuse supplied! Normally four after market actuators will drw slightly over the 15amp mark, dependent mostly on the way the actuator is mounted!

commit your way to jehovah and he will act in your behalf. psalms 37:5

mdem2

Member - Posts: 4

Joined: August 02, 2010

Location: Maryland, United States

Posted: August 02, 2010 at 3:40 PM / IP Logged

so do i need 2 451m's? or just one? and should i upgrade the fuse?

mdem2

Member - Posts: 4

Joined: August 02, 2010

Location: Maryland, United States

Posted: August 02, 2010 at 3:41 PM / IP Logged

https://www.the12volt.com/installbay/forum_posts.asp~TID~121649~PN~10

is this the diagram i wannna use? whats that little squiqqle thing off to the side? ground?

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: August 02, 2010 at 4:40 PM / IP Logged

One 451 is all you need!

commit your way to jehovah and he will act in your behalf. psalms 37:5

mdem2

Member - Posts: 4

Joined: August 02, 2010

Location: Maryland, United States

Posted: August 02, 2010 at 7:49 PM / IP Logged

how does the 3 pin connector from the 451m plug into the 2pin from a 5901

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: August 02, 2010 at 9:10 PM / IP Logged

Where the white two pin connector with the green and blue wires plug in, you plug the three pin harness there!

commit your way to jehovah and he will act in your behalf. psalms 37:5

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 and dei 524n

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.