the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2011 gmc sierra denali bose bypass


Post ReplyPost New Topic
< Prev Topic Next Topic >
mcbr0wnie 
Member - Posts: 1
Member spacespace
Joined: December 07, 2010
Location: Arizona, United States
Posted: December 07, 2010 at 2:51 PM / IP Logged  
How can I bypass the parking brake wire on a 2011 gmc sierra with the factory bose navigation system. Do I have to hook the brake wire to a toggle switch along with the ground? Any help would be awesome!
tonanzith 
Gold - Posts: 603
Gold spaceThis member consistently provides reliable informationspace
Joined: July 18, 2008
Location: Washington, United States
Posted: December 19, 2010 at 1:09 AM / IP Logged  
The best way would be to grab it going in to the Nav unit and use a toggle and Diode isolate the signal.
Gary Sather

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer