clifford intelliguard 600 wiring diagram

Help...I need a wiring diagram/manual for Clifford Intelliguard 600. I don't see in the downloads section. Does anyone know where I can find this??? Trying to make sense of an old alarm...probably from 1992 or so. THANKS!

Actually 2002. Avant Guard 4 without the remote start

PS Unless you're in the UK, slightly different spec. Not in Directechs and I only have a hard copy.

howie ll wrote: Actually 2002. Avant Guard 4 without the remote start

Are you saying that the wiring diagram will be the same for intelliguard 600 and Avant Guard 4?

Again, yes. It was the AG4 without the Intellistart IV module.

AG4 seems very different than what I'm looking at. The Intelliguard 600 I have here has two 15 pin connectors on the front of it. It was also wired in an Intellistart and Smart Windows. This is going to be a pain to sort out.

I'll post the install guide within the next few minutes, Downloads/Manuals section here, search for Intelliguard 600

Done.

Thanks, I appreciate your help...but the new link you posted for intelliguard 600 goes to a guide for an intelliguard 6000. Still trying to find a install guide to help me delete this alarm. Thanks

DEI doesn't list an Intelliguard 600, it lists a Concept 600 and an Intelliguard 6000 all of which are on this site in the Downloads/Manuals section. There was an Intelliguard 700 dating back to 12/93. If it isn't there I'll shortly post it to Downloads/Manuals. Note: most of the above, mid 90s are known as G3 models, all have the same colour wiring except the Concept 600 which was G4, you might be able to extrapolate. As a practical note forget about making it work unless you have a remote in perfect working order, you will have to look amongst the garbage advertised on fleabay.