disable pats

Home / the12volt's Install Bay / Car Security and Convenience / disable pats (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

doitright

Member - Posts: 1

Joined: September 06, 2012

Location: California, United States

Posted: September 06, 2012 at 4:08 AM / IP Logged

Is there anyway to disable the PATS on my truck I have a 2001 f150 Supercrew with a 5.4L engine that I just installed I've had to replace the ignition cylinder with 2 new keys my problem is it will not turn over and i really need to get it started so if there a way to bypass or disable the PATS I would like to know. jmk56

jmk56

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: September 06, 2012 at 8:11 AM / IP Logged

You can remover the chip in the key on those older ones by removing the little black plastic square spot next to the key blade. You may be able to just switch the chip from the old to new key. If not, remove the chip and glue it to the immobilizer ring to permanatly disable....

Mike M2

Tech Manager

CS Dealer Services

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

disable pats

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.