Need help with Delta pro 5005

Home / the12volt's Install Bay / Car Security and Convenience / Need help with Delta pro 5005 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jb03

Member - Posts: 15

Joined: May 11, 2003

Location: United States

Posted: May 13, 2003 at 8:41 PM / IP Logged

I recently purchased a delta pro 5005. I have everything installed but the door locks and the trunk release. Having a problem with the reverse polarity thing I think. My vehicle is a 1994 Gmc Yukon and I dl'd the diagrams from this site but still not working. I hooked the Red wire from the alarm to the orange wire in the doorlock harness. The light blue in the harness to the Green on the alarm and the BLACK/ White on t harness to the Blue on the alarm. It's not working???? I noticed on the provided diagram from this site that where it says door unlock its reverse polarity. Is there something I missed there?? With the trunk release I went from the back of the switch and tried both the orange and the brown wire with no luck. On the diagram it said wire was to be BLACK/ white but didn't see that there. With this alarm it says all relays are built in and they are - outputs. Your help would be greatly appreciated. Jody Barnes

jb03

Member - Posts: 15

Joined: May 11, 2003

Location: United States

Posted: May 13, 2003 at 8:47 PM / IP Logged

Sorry this is the link I looked at for the diagram:https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1994&make=GMC&model=Yukon%204WD&ID=17946&type=Alarm Jody B

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 13, 2003 at 8:55 PM / IP Logged

Power Lock LT BLUE DRIVER KICK PANEL BELOW #203

Power Unlock BLACK/ WHITE OR BLK/RED DRIVER SPEAKER

are you using relays????

what is the door lock outputs on the alarm??

Trunk Release BROWN (+) AT REAR GLASS RELEASE SWITCH #231

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

jb03

Member - Posts: 15

Joined: May 11, 2003

Location: United States

Posted: May 13, 2003 at 9:48 PM / IP Logged

No I didnt think I needed to use relays because it says they are built in. The outputs on the alarm are negative and had a ? What does the #203 and #231 mean?? Thanks for your help

jb03

Member - Posts: 15

Joined: May 11, 2003

Location: United States

Posted: May 13, 2003 at 9:51 PM / IP Logged

OOOps it says Red---(+) 12v. out for the door locks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need help with Delta pro 5005

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.