the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 camry no heater blower


Post ReplyPost New Topic
< Prev Topic Next Topic >
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: December 22, 2014 at 9:48 PM / IP Logged  
Put a Avital 4103 in a 06 Camry today...Fired right up..no immobilizer and hooked up the second start wire. I have no heater and I have a air bag light while under remote start. Checked with a meter verifing the voltages are there..all looks good. What am I missing?
shark mobile 
Copper - Posts: 83
Copper spacespace
Joined: November 22, 2014
Location: Ontario, Canada
Posted: December 22, 2014 at 10:04 PM / IP Logged  
2006 Toyota Camry DirectWire
Item Wire Color Polarity Wire Location
12 Volts WHITE/ red (30A) + ignition switch, white 8 pin plug, pin 7
Second 12 Volts white (5A) + ignition switch, white 8 pin plug, pin 2
Starter BLACK/ white + ignition switch, white 8 pin plug, pin 8
Second Starter BLACK / YELLOW + ignition switch, white 8 pin plug, pin 1
Ignition BLACK/ red + ignition switch, white 8 pin plug, pin 6
Second Ignition BLACK / YELLOW + ignition switch, white 8 pin plug, pin 4
Third Ignition N/A   
Accessory blue/red + ignition switch, white 8 pin plug, pin 3
Second Accessory N/A   
Third Accessory N/A
Hope that helps :)
Solder, tape, repeat!
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: December 23, 2014 at 7:13 AM / IP Logged  
The BLACK / YELLOW second ignition wire isn't getting power.
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: December 23, 2014 at 9:51 PM / IP Logged  
I will check that...had all the connection correct...just ran out of time checking everything...back at it tommorow...Thanks guys   and Merry Christmas to you!!!!!!
shark mobile 
Copper - Posts: 83
Copper spacespace
Joined: November 22, 2014
Location: Ontario, Canada
Posted: December 24, 2014 at 10:02 PM / IP Logged  
Merry Christmas!
Solder, tape, repeat!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer