1992 K1500 avital 4103 door locks

Hi guys Im back again! I have installed a avital 4103l in my 92 k1500 truck and I'm trying to figure out how to hook up the door locks. I have the 451M relay kit. I have power and the lock and unlock wires when I'm pressing lock or unlock so I think its a positive system correct?? I need help with this please!

No. the 92 K1500 is a 5-wire. In the driver kick find the lt blue and blk/red wires cut both of them in two. 451M wire   ........... K1500 wire brn/blk ..... lt blu that goes into the driver door wht/blk ..... blk/red that goes into the driver door grn/blk ..... blk/red that goes to passenger side blu/blk ..... lt/blu that goes to passenger side violet and violet/blk to 12V Hot at all times.

Thanks for the info but its backwards! I pressed lock and they unlocked! Also best place for wiring in that truck was under the drivers side dash speaker as there is no access in kick panel. The wiring goes as following: WHITE/ blk to light blue to dr door GREEN/ blk to light blue to pass door BROWN / blk to blk/white or blk/red dr door blue/blk to blk/white or blk/red pass door And violet/blk to constant 12v Just in case anybody else needs the info! Thanks again for the help!