Viper 5706v fob unlock issues

For some reason my lock works fine my 2001 saturn sc2 does not ground side control the door locks like the viper does. I've wired in a relay the lock works fine by supplying a ground to the relay coil and locking the doors. But the unlock is reading around 6kohms not pushing the fob and when I push the unlock on the fob it goes completely open. There is not volatage with no buttons pushed and when pushed I get 1.9v. It is worthy to note my blue unlock wire was hooked to a 5v reference source when the unlock button was pushed. I had to wrong wire. I'm assuming ive smoked something inside the viper module for the unlock circuit? =[