installing avital 4103 in 1994 f150

Home / the12volt's Install Bay / Car Security and Convenience / installing avital 4103 in 1994 f150

Welcome Guest :)

Members

< Prev Topic Next Topic >

dmichaelsmith1

Member - Posts: 1

Joined: January 14, 2016

Location: Nebraska, United States

Posted: January 16, 2016 at 4:07 PM / IP Logged

Hey guys! I could use some help. I installed an Avital 4103 remote start on my 1994 F150 5.8L. It will start so that's not the problem. But the heater blower does not come on. I tapped into the Grn/Blk and Gry/Yell wires for the accessory wires. But there are 3 total Gry/Yell wires in the ignition switch harness. So I'm not sure I picked the right one.

Also, my door locks will not function either. I tapped into the factory keyless entry wires. I could use some help please!

Search for other posts by dmichaelsmith1

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: January 16, 2016 at 5:36 PM / IP Logged

You need to test the wires with a multimeter. Accessory wires will not have power when the key is in the off position, but will have power when the key is in the accessory position.

You may need to 5-wire: https://www.the12volt.com/doorlocks/page3.asp#5w

My ex once told me I have a perfect face for radio.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.