95 Jeep Grand alarm wiring

  I have a 95 JGC with a factory alarm, but it does'nt have a led indicator.  I purchased a led scanner to solve this.  I was told that with my keyless entry I just need to connect to the doorlock wire that is 12volt when unlock and grounded when lock.  I checked the diagrams at this site, but no luck.  Any help of any wire that meets this requirement  is appreciated.  Thanks in advanced.  

Make:   Jeep Model: Grand Cherokee Year:    1993-95 This Database Was Last Updated On:    6/9/03 Index #: 8963 Alarm Constant 12 volts RED / WHITE FUSED AT 40 AMP AND PINK/BLACK FUSED AT 60 AMP Ignition 12 volts DARK BLUE/GRAY IGNITION SWITCH HARNESS Starter YELLOW/DARK BLUE IGNITION SWITCH HARNESS Dome Light YELLOW (-) DRIVER KICK PANEL OR COURTESY LIGHT Trunk Pin Switch GRAY/BLACK (-) LIFTGATE PIN SWITCH * Parking Lamp DARK BLUE/RED (+) HEADLIGHT SWITCH OR AT FUSE BOX Power Lock ORANGE / VIOLET DRIVER KICK #202 Power Unlock PINK/VIOLET PANEL * 1993 GRAY (-) At Liftgate Switch, VIOLET / YELLOW (-) At Light. YELLOW (-) Door Trigger Should Cover Rear Hatch On All. #202- See Positive Pulse Door Lock Diagram. Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt