2003 chevy silverado steering column

Home / the12volt's Install Bay / Car Security and Convenience / 2003 chevy silverado steering column (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bear80

Member - Posts: 21

Joined: August 31, 2003

Location: United States

Posted: December 02, 2003 at 8:38 PM / IP Logged

do some one know how to remove the steering column shroud on a 2003 chevy silverado thank's

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: December 02, 2003 at 10:59 PM / IP Logged

First the tilt wheel lever pulls off. Pull straight out to the left on the tilt wheel lever and that will pop off. Next you need to seperate the top and bottom portions of the shroud. It hinges in the back so you need to seperate the front first. Just sort of get a spot to grab and pull and work it until it comes apart there really isn't much science to it unfortunately. Run the car with the heat on for a awhile first this will help your chance of not breaking any of the clips. Hope that helps,

Mike

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 chevy silverado steering column

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.