Viper 300 Esp / Valet 551t

Home / the12volt's Install Bay / Car Security and Convenience / Viper 300 Esp / Valet 551t (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

flipper

Member - Posts: 2

Joined: February 17, 2004

Posted: February 17, 2004 at 5:52 PM / IP Logged

I currently have a Viper 330 esp in my Pathfinder. I have the power locks, starter disable and a remote dual stage shock sensor (for a voice module). I recently purchased the Valet 551t add on remote start. Can some tell me what wires HAVE to be conntected BETWEEN the two units? I have done seperate remote starts and alarms so have some knowledge and realize what will be needed for the remote start. My main concern is the connection between the two units to allow for all features to be used.

Thanks.

flipper

Member - Posts: 2

Joined: February 17, 2004

Posted: February 18, 2004 at 8:20 AM / IP Logged

Can't anyone here help me? Do I need to provide more information? I know there are a lot of DEI istallers on here.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 300 Esp / Valet 551t

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.