compustart on a 99 sunfire

Hey guys, I'm new in this forum and hoping to find some help... 

I have about three years experience with starters and alarms systems.  But, I've been having trouble with my friends 99 sunfire.  It's a manuel transmission  and the passlock system is giving me all kinds of problems.  I'm using a DEI 555L to bypass the security system(passlock1).  I have all the proper  information to get the unit fonctionnal with the vehicle. 

Here are the symptoms that I'm observing when all the wires are connected as indicated in the diagrams.

- The car will start with the key and the 555L will learn the R-code from the key.\ The systems learns the code.  During the remote start,  the car starts but dies after a few seconds. 

- At this point, I' m no longuer able to remote start the car or use the KEY to start the car.  So basically, the key doesn't work at all. ( e.i start car with key, few seconds later, the car shuts down)

-  This is the weird part,  If i cut the "check bulb" wire from the 555L , I'm able to start the car with the key, but not with the remote starter.  Oh yeah, this "check bulb" is in parallel with a black wire on the ignition harness. (this black wire grd's out during crank time).

I know for a fact that this is a problem with the Passlock systems.  (i think ) (i hope)   If anyoone out there has heard or experienced this type of problem please let me know..... I greatly appreciate the help.

Oh yeah, one more thing, on theclutch pedal, there are two switches that are being influenced.  One is the starter wire wich is located behind the pedal and against the firewall.  The other one is higher up, on top of the pedal..  I forget the colors..  Does anyone know what the second set of wires do..

Thanks a lot guy's... Sorry with all the writing... thanx....................  

This could be.. itd make sense alrite...