2000 camry keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / 2000 camry keyless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

marvel

Member - Posts: 23

Joined: March 17, 2004

Location: United Arab Emirates

Posted: March 22, 2004 at 5:29 AM / IP Logged

2000 camry keyless entry -- posted image. can somebody please help me how to install a keyless entry device in my camry 2000? what are the things i should know before doing it?

turbo

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 22, 2004 at 7:31 AM / IP Logged

what brand of keyless entry are you using??

Make: Toyota

Model: Camry

Year: 1999-01

Alarm

Constant 12 volts WHITE & WHITE/ RED IGNITION SWITCH HARNESS

Ignition 12 volts BLACK/ RED IGNITION SWITCH HARNESS

Starter RED IGNITION SWITCH HARNESS

Dome Light RED / WHITE (-) 7 PIN CONNECTOR AT THE FUSE BLOCK

Trunk Pin Switch RED / YELLOW (-) AT LIGHT IN TRUNK

Parking Lamp GREEN (+) 13 PIN CONNECTOR AT THE FUSE BLOCK

Power Lock L GREEN 20 PIN WHITE CONNECTOR

Power Unlock D GREEN IN DRIVER KICK PANEL * #209

* Child Safety Lock - BLUE/RED (-) In Same Connector As Door Lock Wires Above. #209- See Child Safety Lock Diagram.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 22, 2004 at 7:32 AM / IP Logged

The lock wires are about 18 gauge. They will test only by operating the key in the passenger door lock cylinder, not the rocker switch on the door itself. The installation is very basic and requires minimal wires to be hooked up. Most KE systems are type B (-) and that is what you have on the Camry so it will be a simple wire to wire installation. No relays required.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

marvel

Member - Posts: 23

Joined: March 17, 2004

Location: United Arab Emirates

Posted: March 23, 2004 at 5:06 AM / IP Logged

Thanks guys

as of the moment my car doesnt have any keyless entry device. so i can just buy KE device and just connect the wires together? do i have to program anything after i connect these wires?

turbo

marvel

Member - Posts: 23

Joined: March 17, 2004

Location: United Arab Emirates

Posted: March 23, 2004 at 5:09 AM / IP Logged

draasch wrote:

what brand of keyless entry are you using??

Make: Toyota

Model: Camry

Year: 1999-01

Alarm

Constant 12 volts WHITE & WHITE/ RED IGNITION SWITCH HARNESS

Ignition 12 volts BLACK/ RED IGNITION SWITCH HARNESS

Starter RED IGNITION SWITCH HARNESS

Dome Light RED / WHITE (-) 7 PIN CONNECTOR AT THE FUSE BLOCK

Trunk Pin Switch RED / YELLOW (-) AT LIGHT IN TRUNK

Parking Lamp GREEN (+) 13 PIN CONNECTOR AT THE FUSE BLOCK

Power Lock L GREEN 20 PIN WHITE CONNECTOR

Power Unlock D GREEN IN DRIVER KICK PANEL * #209

* Child Safety Lock - BLUE/RED (-) In Same Connector As Door Lock Wires Above. #209- See Child Safety Lock Diagram.

thanks for the reply, but i dont understand the things that you wrote.

what is this "alarm" is it included in the KE device, because i only plan to put Just keyless entry.

are these the wires of the KE device or the wires inside the car?

hope to hear from you.

turbo

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 23, 2004 at 8:20 AM / IP Logged

most of the wires are the same for K/E and alarm.

you will need the following:

main power

switch 12v ign.

lock wires

you may have a dome light sup. feature

there may be a few more hook ups.

tell me model of K/E you have and i will cross match the wires for you...

if you have a link for that unit that would be great

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 camry keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.