factory remote

Home / the12volt's Install Bay / Car Security and Convenience / factory remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 30, 2004 at 6:32 PM / IP Logged

does anyone know on a 93 Mercury Sable how to program factory transmitter???? i know where the unit is, how ever the info i have doesnt match up to the unit......there is no two wire plug at the K/E unit......any help would be great...

thanks,

david

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Scott35

Silver - Posts: 258

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 02, 2002

Location: United States

Posted: June 30, 2004 at 7:52 PM / IP Logged

Hey David, Here is what I have:Turn ignition to run or acc. Momentarily jump pins in programming connector located in L/R qtr panel area. All doors will lock then unlock to confirm programming mode. Press any button on 1st transmitter. Door locks will cycle to confirm programming. Press any button on 2nd remote. Turn ignition to off. Locks will again cycle to indicate end of programming mode.

Tacomacrew

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

factory remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.