the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

alarm trips on remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
1badnotch 
Member - Posts: 15
Member spacespace
Joined: December 21, 2003
Location: United States
Posted: September 28, 2004 at 1:18 AM / IP Logged  

i had my viper 800 esp in my 2000 gmc sonoma for a while now. and finally got the time to finish the yor valet 551t install with the passlock module.

everything works properly except whe i remote start it trips the alarm if i disarm it will stay running put the key in can drive etc.

i tried to unplug the shock sensor because i thought that was tripping it but it still does it

does it have something to do with the sensor shunt input on the alarm i tried to use the remote starts blue programable output for this but still trips but operates the passlock module correctly

thanks in advance eric

JMaxx93 
Copper - Posts: 73
Copper spacespace
Joined: December 02, 2003
Location: United States
Posted: September 28, 2004 at 1:22 AM / IP Logged  

does the alarm sound right before the car starts or after the car starts?  it sound like its just picking up the ignintion wire input from the remote start.  as you know if you try the start you car while its armed the alarm sounds.  probably the same thing happening.

1badnotch 
Member - Posts: 15
Member spacespace
Joined: December 21, 2003
Location: United States
Posted: September 28, 2004 at 1:27 AM / IP Logged  

after the headlights come on you hear the fuel pump purge and then during start it trips.

how do i get around this prob?

1badnotch 
Member - Posts: 15
Member spacespace
Joined: December 21, 2003
Location: United States
Posted: September 28, 2004 at 9:29 PM / IP Logged  
any ideas?alarm trips on remote start -- posted image.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: September 29, 2004 at 3:00 PM / IP Logged  
yes the 551 has an ignition out wire ( yellow ) that feeds to the ignition wire of your alarm... it knows when you remote start the vehicle to hold back a voltage on that line, but to allow it in all other cases....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
1badnotch 
Member - Posts: 15
Member spacespace
Joined: December 21, 2003
Location: United States
Posted: September 30, 2004 at 1:00 PM / IP Logged  

kgerry wrote:
yes the 551 has an ignition out wire ( yellow ) that feeds to the ignition wire of your alarm... it knows when you remote start the vehicle to hold back a voltage on that line, but to allow it in all other cases....

so i cut the viper wire that goes to the ign wire and use the one from the 551t

that would explain alot i had them both tied in together


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer