the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 Express remote starter install


Post ReplyPost New Topic
< Prev Topic Next Topic >
bnwahoo 
Member - Posts: 2
Member spacespace
Joined: December 05, 2004
Location: United States
Posted: December 05, 2004 at 4:28 PM / IP Logged  

I have troubles installing a remote starter/alarm on 2002 Express LT1500 conversion van. I got ignition wires connected but can't find door/light/lock/brake wires. I got wiring chart from Design Tech and the forum here but it does not help. I wonder if I can get a little more detail for the locations. Also I can not find any good location for a hood pin switch. Where does everyone put that in? Also I do not believe it got PASSLOCK but I am not 100% sure. The car starts w/ a key that was copied from the original (so there is no registor in the key).

The alarm is Design Tech "Ready Start" from BJ wholesale.

Thanks!

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: December 05, 2004 at 10:46 PM / IP Logged  

This vehicle has the Passlock II system that I suggest using the GMBP module for. Also here is the rest of the information on wire color and locations:

POWER LOCK|lt. blue            |+  |drivers door harness       

POWER UNLOCK|white               |+  |drivers door harness       
PARKING LIGHTS +|brown               |   |light switch               
DOOR TRIGGER|purple              |-  |drivers door harness   

TRUNK/HATCH PIN|ORANGE / black        |-  |at light in rear cargo area

BRAKE WIRE|white               |+  |stop light switch          

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
bnwahoo 
Member - Posts: 2
Member spacespace
Joined: December 05, 2004
Location: United States
Posted: December 06, 2004 at 8:34 PM / IP Logged  

Thanks,

So, is the bypass requirement? Hope I can find those harnesses and switches right this time.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer