Remote start problems with APS-786

Home / the12volt's Install Bay / Car Security and Convenience / Remote start problems with APS-786 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cubanonj

Member - Posts: 9

Joined: October 25, 2004

Location: United States

Posted: January 13, 2005 at 3:47 PM / IP Logged

Ive spent the day installing an Audiovox APS-786 in a 2000 Toyota Echo. Ive got most of it installed (minus the door, hood and brake pedal trigger) and the alarm works. but the remote start won't crank or even power up the dash. I tried programming the RPM's and it went thru fine. Im thinking maybe it has something to do with the accessory isolation relay. Is suppossed to be a separte relay or an existing one in the car. I followed the diagram listed for the 2001 Echo and they seem to be right as far as polarity, color code, and location. what am i doing wrong?

thanx in advance

Chris

russ lund

Copper - Posts: 188

Joined: April 07, 2004

Location: United States

Posted: January 13, 2005 at 10:02 PM / IP Logged

Check the BLACK/ red and BLACK/ yel (toyota wires)when the key is turned on.If they have power(They Should) then try to remote start and measure for voltage.If not I'd assume that the remote start is not comming on for some safety reason.Start over and don't skip the small stuff it will get you every time.

BigDog

cubanonj

Member - Posts: 9

Joined: October 25, 2004

Location: United States

Posted: January 14, 2005 at 4:54 PM / IP Logged

I eliminated things such as the hood pin, door trigger, and brake pedal. Could it be the neutral saftey switch? which wire controls this??

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote start problems with APS-786

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.