viper 771XV, 96 crown victoria

Home / the12volt's Install Bay / Car Security and Convenience / viper 771XV, 96 crown victoria (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

p71cruiser

Member - Posts: 7

Joined: January 05, 2005

Posted: January 27, 2005 at 6:17 PM / IP Logged

where is a good place to put the shock sensor on my 96 crown victoria? Its on a piece of metal now but I can hit the side of the door and nothing will happen. I did adjust the sensitivity to the lowest and still does seem to set the alarm off?

Thanks for your help !!

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: January 27, 2005 at 6:26 PM / IP Logged

the best place to put it is in the main harnes (ignition harnes) viper 771XV, 96 crown victoria -- posted image.

how own your mind, control your life.

MECP certified. always use a DMM

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 771XV, 96 crown victoria

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.