Alarm go off when start w/ remote

Home / the12volt's Install Bay / Car Security and Convenience / Alarm go off when start w/ remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

diep4554

Member - Posts: 12

Joined: November 10, 2002

Location: United States

Posted: November 18, 2002 at 5:58 PM / IP Logged

Hi,

I have installed remote starter cs300 for Toyota Corolla 03. Everythings are connected and programed exept for "ground when running wire". every times I start with remote, engine works right but then alarm go off on the same time "manufacture alarm".

what would be the probs? and how important to have ground when running wire connected? any helps will be greatly appreciated.

Tom

Tom D

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: November 18, 2002 at 6:03 PM / IP Logged

Are you sure its the factory alarm going off? Does it only do it when the doors are locked? Is it ok if you don't lock the doors?

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: November 19, 2002 at 5:21 PM / IP Logged

Find the key sense wire--- this is in the little two-pin plug at the ignition cylinder, right next to the ignition wires----- it will show a ground whenever the key is inserted---- attach your "ground when running wire" directly to here, and it will disarm the factory alarm when you remote start.

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: November 19, 2002 at 6:23 PM / IP Logged

do what chris said i have done this before same prob with an add on to the factory keyless entry upgrade alarm and i had to do just that so it does not matter when the car is armed cause that key sence wire disables it and when the door lock mod knows the doors are locked it automatically rearms alarm .

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

diep4554

Member - Posts: 12

Joined: November 10, 2002

Location: United States

Posted: November 20, 2002 at 12:18 PM / IP Logged

Thanks a lot guys, Yes, factory alarm going off even doors is unlocked or disarmed. I have installed a few different models, and it never happened before. Key sense is the prob. that Chris pointed it out. It is working right now. Thanks again

Tom D

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm go off when start w/ remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.