Programming Compustar

Home / the12volt's Install Bay / Car Security and Convenience / Programming Compustar (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tigermd75

Member - Posts: 3

Joined: October 07, 2005

Location: United States

Posted: October 14, 2005 at 9:16 AM / IP Logged

Hi all,

I installed compustar 2w900fm on my car but there are a couple questions I want to ask:

How to program it to lock the car when started with a key and unlock when turn off with a key?

Where is the brake switch for 97 Honda Accord?

Is it possible for a remote trunk release?

How to add windows up and down?

Where to mount the shock sensor?

Thanks in advance.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 14, 2005 at 9:32 AM / IP Logged

tigermd75 wrote:

How to program it to lock the car when started with a key and unlock when turn off with a key?

Installation Maunal Page 7-10: Go into programming Menu # 2 Option 5 for ignition door locks.

tigermd75 wrote:

Where is the brake switch for 97 Honda Accord?

GREEN / WHITE at the brake pedal switch

tigermd75 wrote:

Is it possible for a remote trunk release?

If you have the Accord with the power trunk then all you have to do is use a relay to reverse the polarity of the trunk release output on the CN4 harness to (+). If not you need to add a solenoid to pull on the cable in the back. Regardless it is possible.

tigermd75 wrote:

How to add windows up and down?

You will need to purchase 2 window modules for up/down for a coupe and 4 modules for a sedan. There are 2 AUX channels on the Compustar that you can use to open or close the windows witht hese modules. Modules go for around $ 20 - 50 each depending on what system and brand you go with.

tigermd75 wrote:

Where to mount the shock sensor?

Around a loom of wires preferrably the ignition harness because it's the largest one in your line of sight.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Programming Compustar

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.