passlock 1

Home / the12volt's Install Bay / Car Security and Convenience / passlock 1 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

auto_sec_paul

Member - Posts: 6

Joined: November 14, 2005

Location: Canada

Posted: November 19, 2005 at 11:27 AM / IP Logged

Hey everybody, working on a 1996 Pontiac Sunfire w/Passlock 1 and having a bit of bypass trouble. I haven't done passlock 1 in a while and don't have the regular Yellow and ORANGE / Black, wires as with Passlock 2.

In the DEI bypass manual (555L) it says that I need to connect the wires the same as passlock 2 (plus the bulb check wire), but I have a three wire ribbon harness coming from the ignition cylinder that only has two black wires and a BLACK/ white wire. Does anyone know if I need the bypass or not and if so, what wires do I use in this harness?

Vehicle has absolutely no options and no chip in the key but has a theft light in the instrument cluster and a manual transmission.

Thanks.

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: November 19, 2005 at 12:33 PM / IP Logged

Have a look here Paul.

http://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1047.pdf

auto_sec_paul

Member - Posts: 6

Joined: November 14, 2005

Location: Canada

Posted: December 09, 2005 at 12:37 PM / IP Logged

Thanks,

The next morning at work I figured it out when I looked at the Directechs page I printed off the day before...I was just too blind to see the note at the bottom of the page that said " If your passlock wires are all black........"

I guess next time I'll read the fine print!

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: December 09, 2005 at 8:02 PM / IP Logged

Good to know you got it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

passlock 1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.