Diode isolation for neon

Home / the12volt's Install Bay / Car Security and Convenience / Diode isolation for neon (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Reeceddogg

Copper - Posts: 329

Joined: September 23, 2002

Location: United States

Posted: November 21, 2005 at 11:24 AM / IP Logged

I'm putting a neon in my grill but i only want it to come o with the light output on the alarm how do i diode isolate it so it doesn't get power when i cut my parking lights on.

infinkc

Copper - Posts: 438

Joined: October 28, 2002

Location: United States

Posted: November 21, 2005 at 2:13 PM / IP Logged

so you want it to flash when your alarm parking lights go on? or stay constant? you will need to isolate it by a relay not by a diode.

There are 10 types of people in the world, ones that understand binary and ones that dont.

Reeceddogg

Copper - Posts: 329

Joined: September 23, 2002

Location: United States

Posted: November 22, 2005 at 1:00 PM / IP Logged

which way should i i have the cathode side. i'm putting the diode in line with the parking light output from the alarm but i want to make sure that when i cut the parking lights on from the light switch the neon doesn't cut on

Reeceddogg

Copper - Posts: 329

Joined: September 23, 2002

Location: United States

Posted: November 22, 2005 at 1:14 PM / IP Logged

how?

Reeceddogg

Copper - Posts: 329

Joined: September 23, 2002

Location: United States

Posted: November 22, 2005 at 1:38 PM / IP Logged

the diode, cathode side facing toward the alarm or parking light switch and before or after the relay, i' assuming after right.

Reeceddogg

Copper - Posts: 329

Joined: September 23, 2002

Location: United States

Posted: November 23, 2005 at 10:53 PM / IP Logged

the neon is fast to cut on the moment it gets power.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Diode isolation for neon

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.