interior light output wire, 98 intrepid

Home / the12volt's Install Bay / Car Security and Convenience / interior light output wire, 98 intrepid (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 21, 2006 at 7:38 AM / IP Logged

I have a 98 intrepid with the delayed interior lights.On my clifford arrow 3,i have a gray door trigger wire,and a BROWN / white interior light output wire.I know where the gray door trigger wire goes,but where does the BROWN / white wire go?? Does it get tied into the door trigger wire?

"ole blake"

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 21, 2006 at 8:47 AM / IP Logged

The dome light surveillance wire is a low amp output that you need to use a relay to operate the vehicles domelight wire. For the dome light wire use the YELLOW (-) trigger wire found at the back of the fuse box in a BROWN plug.

Use this diagram ( Use diagram 1) for the relay.

http://www.velocitymotorsport.com/images/install_notes/105.jpg

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 21, 2006 at 4:33 PM / IP Logged

I see.The weird thing is,in my manual it has it wired like this,

30-yellow wire

85-12v

86-interior output wire

87-ground

87a-unused

"ole blake"

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 22, 2006 at 2:37 AM / IP Logged

Will this work either way??

"ole blake"

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 23, 2006 at 2:50 AM / IP Logged

Anyone with an answer??

"ole blake"

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 23, 2006 at 11:21 AM / IP Logged

Yes it will work either way.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

interior light output wire, 98 intrepid

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.