the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1997 Maxima Neutral Wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
bryantobando 
Copper - Posts: 64
Copper spacespace
Joined: November 29, 2005
Location: United States
Posted: December 09, 2006 at 1:08 PM / IP Logged  
Hello, im doing a remote start on a 1997 maxima. But i dont know where to get the neutral wire from. On a wire diagram that i got from audiovox, it says the "neutral saftey wire" is GREEN/ orange on the drivers switch. First of all what switch is it? Second, could this wire only be for automatic trans. maximas. So far, im using the e-brake for saftey but i dont want to let this car go without doing the neutral wire. For the clutch, im connecting it to the start output of the remote start.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: December 09, 2006 at 5:34 PM / IP Logged  

So what I'm guessing, is that you have installed a remote start that is NOT designed for a manual transmission. If it were.....you do NOT need a neutral safty wire.

BE CAREFUL.

bryantobando 
Copper - Posts: 64
Copper spacespace
Joined: November 29, 2005
Location: United States
Posted: December 10, 2006 at 9:53 AM / IP Logged  
What brands make Manual remote starts. Which ones are good?
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: December 10, 2006 at 7:49 PM / IP Logged  
Compustar, Astroflex, Ultrastarter....most likely the favorite on this site would be the Compustar. Me, I'm an Astro guy.
ers1121 
Copper - Posts: 110
Copper spacespace
Joined: January 23, 2004
Location: New Jersey, United States
Posted: December 11, 2006 at 5:46 AM / IP Logged  

For manual tranmission installs I prefer Ultrastarters, to me they seem the most user friendly.

Ed

Ed
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: December 11, 2006 at 7:32 AM / IP Logged  
Most Nissan vehicles have a "P/NP' switch built in the to manual tranny.  It goes to ground when the tranny is in N and it floats when the car is in any gear.  All the ones I have seen run from the tranny to the ECU.  Accessing the factory service manual should give you all the information you need.
Kevin Pierson
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: December 11, 2006 at 7:35 AM / IP Logged  
Sorry, but "P/NP" stands for Park/Neutral Position switch.  Nissan's ECUs use it to prevent no load revving.
Kevin Pierson
bryantobando 
Copper - Posts: 64
Copper spacespace
Joined: November 29, 2005
Location: United States
Posted: December 11, 2006 at 11:05 AM / IP Logged  
So where can I find the wire for the neutral saftey on this car. I cant change the remote start unit anymore and I prefer DEI over anything
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: December 11, 2006 at 11:24 AM / IP Logged  

Like I said, you will need to consult the factory service manual for the exact location, if it even exists.  You can purchase the factory service manuals online from Nissan for $20 (pdf format). 

If you don't want to go that route, locate the ECU and look for the color wire you listed above.

Kevin Pierson
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: December 11, 2006 at 10:29 PM / IP Logged  

Don't TRY and find a way to instal the incorrect remote start on a manual trans....it's just plain foolish.

PLUS::: the mods will lock the topic.....then your done.

Do it correctly.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer