the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 audi a4 alarm, remote start wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
datatechent 
Member - Posts: 11
Member spacespace
Joined: September 25, 2005
Posted: February 05, 2007 at 2:38 PM / IP Logged  

anyone have the 2006 a4 wiring diagrams for remote start \ alarm functions ?

any tips on installing on audi's ?

thanks

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: February 05, 2007 at 10:31 PM / IP Logged  
PASSIVE ANTI-THEFT YES TRANSPONDER   SEE NOTES 
 12 VOLTS Red In harness from ignition switch   + 
 IGNITION Black In harness from ignition switch   + 
 IGNITION 2 Red (small gauge) In harness from ignition switch   + 
 ACCESSORY Yellow/black In harness from ignition switch   + 
 STARTER RED / black In harness from ignition switch   + 
 STARTER 2 Blue In harness from ignition switch   + 
 KEY SENSE Gray / YELLOW Ignition switch harness   + 
 TACH SIGNAL Gray/w. stripe At any of the coils on the engine   AC 
 FUEL INJECTOR Opposite of RED / blue On top of engine under cover   AC 
 LOCK Blue/white At module inside driver's door   - 
 UNLOCK Violet/gray (double pulse) At module inside driver's door   - 
 DOORPIN BROWN / white On 12-pin black plug at factory alarm module   - 
 This wire does not go completely to 12 volts when all doors are closed. This may cause falsing with some after0-market alarm system. A 1-k resistor between this wire and 12 Volts will solve the problem. See the appropriate diagram for more details. The factory alarm system is located below the carpet in front of the driver's seat in a black plastic box.
 HOODPIN BROWN / violet On red plug at factory alarm module   - 
 The factory alarm system is located below the carpet in front of the driver's seat in a black plastic box.
 TRUNK PIN Violet On 12-pin black plug at factory alarm module   - 
 The factory alarm system is located below the carpet in front of the driver's seat in a black plastic box.
 TRUNK RELEASE Yellow/red On 12-pin black plug at factory alarm module   + 
 The factory alarm system is located below the carpet in front of the driver's seat in a black plastic box. You can also use a Violet / YELLOW inside the driver's door at the switch.
 FACTORY ARM Arms with lock wire     
 FACTORY DISARM Disarms with unlock wire     
 BRAKESWITCH RED / black At switch above brake pedal   + 
 PARKLIGHTS SEE NOTES     
 The parking lights require some special wiring to activate. See the provided diagram for instructions.
 HAND BRAKE BROWN / white On Green plun in Driver's kickpanel or at switch   - 
 CLUTCH SWITCH Gray/black At switch above clutch pedal   Type 2 
 VSS WIRE BROWN / red or WHITE/ blue Behind instrument cluster   AC 

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer