the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

ultrastart u4366m without a shock sensor?


Post ReplyPost New Topic
< Prev Topic Next Topic >
csnut18 
Copper - Posts: 196
Copper spacespace
Joined: January 27, 2007
Location: United States
Posted: February 15, 2007 at 10:38 AM / IP Logged  
Hey everyone I just got a ultrastart u4366m which is their newest model alarm/rs two way for a manual tranny. I was planning on installing it tomorrow but I just opened the box and was horrified to find the shock sensor missing. I know this model comes from the factory with one so im thinking the dealer ripped me off. I have no experience with ultrastart as I usually just install compustar and I know they come with the little black shock sensor. Please tell me what to do as I was planning on spending a couple of hours tom to put this thing in. Thanx in advance.
customak47 
Copper - Posts: 164
Copper spacespace
Joined: October 25, 2005
Location: Vanuatu
Posted: February 15, 2007 at 11:43 AM / IP Logged  
ultrastart has thier shock sensors built into the module and programming is done outside the vehicle through the remote. It is very nice because no wires to run and programming is easy. you can also temporarily bypass shock sensor through remote. Read the owners manual and then if you have any questions, pm or post. Hope this helps...
My rifle is my friend...
csnut18 
Copper - Posts: 196
Copper spacespace
Joined: January 27, 2007
Location: United States
Posted: February 15, 2007 at 11:48 AM / IP Logged  
Thanks. After reading your post I went and read the owners manual. Previously I didn't bother with that as install manuals usually have everything. Anyways this is way good news cause I was about to return it and just throw a compustar in. I was a bit dissapointed when I realized that their is nobody that  answers the phone at ultrastart. I called and emailed them with no response either time. Are they always like this? Hope it won't be too big a pain in the ass to get replacement transmitters. Anyways thank you very much for the help
csnut18 
Copper - Posts: 196
Copper spacespace
Joined: January 27, 2007
Location: United States
Posted: February 15, 2007 at 2:10 PM / IP Logged  
Do you guys know any good sources for replacement two way transmitters for this one should the need arise?
splaudio 
Copper - Posts: 237
Copper spacespace
Joined: January 22, 2006
Posted: February 15, 2007 at 6:24 PM / IP Logged  
if u need remote just contact me or one of the other ultra install guys here...

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer