the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 ford ranger keyless entry


Post ReplyPost New Topic
< Prev Topic Next Topic >
gregmeisman 
Member - Posts: 12
Member spacespace
Joined: August 03, 2005
Location: United States
Posted: October 16, 2007 at 9:27 PM / IP Logged  
Does anyone know the wiring color code and location of the oem keyless entry module on a 2007 Ford Ranger supercab?  Thanks
Greg
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 16, 2007 at 9:48 PM / IP Logged  
LOCK (-) Violet/gray       UNLOCK (-) Gray / YELLOW
In Gray and Black connector above handbrake near firewall       
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
gregmeisman 
Member - Posts: 12
Member spacespace
Joined: August 03, 2005
Location: United States
Posted: October 17, 2007 at 7:29 PM / IP Logged  

Those are for the switch trigger and I would like to find the wires for the driver door lock motor, so that I can maintain the driver door priority when I install my alarm. 

Greg
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: October 17, 2007 at 7:42 PM / IP Logged  

Drivers unlock ONLY is blue/green reverse polarity. Found in the same plug with the all lock/unlock wires.

Wire a relay for rev. pol. and use the main unlock out from your unit to trigger, use the second unlock to do the other.

gregmeisman 
Member - Posts: 12
Member spacespace
Joined: August 03, 2005
Location: United States
Posted: October 18, 2007 at 8:48 AM / IP Logged  
Thanks, that's just what I needed
Greg

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer