relay for dvr cctv

Home / the12volt's Install Bay / Relays / relay for dvr cctv (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

memphis2k

Member - Posts: 19

Joined: October 15, 2006

Location: Minnesota, United States

Posted: February 06, 2011 at 6:21 PM / IP Logged

Hello,

I need some help with wiring up a relay. I would simply like the relay to turn on a 12v LED. I have an i3 International (i3DVR) for my surveillance. The DVR actually can control the output from the software, just need to know where the wires go on the Altronix RB1224 Relay.

Here is an old document I found that may help out:

I went with an RB1224 Altronix Relay switch.

Below is a link to the PDF:

RB1224 PDF

There is 8 connectors on the relay, not sure what goes where.

memphis2k

Member - Posts: 19

Joined: October 15, 2006

Location: Minnesota, United States

Posted: February 09, 2011 at 3:06 PM / IP Logged

Figured it out.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

relay for dvr cctv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.