Keyless entry + relay question

Home / the12volt's Install Bay / Relays / Keyless entry + relay question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Cybaster

Member - Posts: 2

Joined: July 09, 2004

Location: United States

Posted: July 09, 2004 at 1:13 PM / IP Logged

Hi, this is my first time wiring a keyless entry system. I own a 89 RX-7 with stock power locks. This is an aftermarket door lock motor that the last owner installed.

I traced the door lock motor wires from the door into the driver's side kick panel.

These 2 wires (blue and green)

Keyless entry + relay question -- posted image.

connects to

another strand of wires (didn't take them apart, but assuming they are the power, ground, etc.) these 2 relays...

I asked around and some suggested that i should wire my keyless entry system with the Actuators/reverse polarity set up.

Should i wire my keyless entry system into these relays? If i can wire into these relays, which wires should i connect? OR should i just get 2 new relays, break these wires, and then do the actutators/ reverse polarity set up and connect the "to door lock motor" wires BACK to these 2 relays and let them work as they do now?

Cybaster

Member - Posts: 2

Joined: July 09, 2004

Location: United States

Posted: July 09, 2004 at 1:16 PM / IP Logged

don't know why pictures does not show up...

Keyless entry + relay question -- posted image.

and this one

Keyless entry + relay question -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Keyless entry + relay question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.