me wire an ignition switch

OK, the privous owner of my car (classic mini) wired a two button system. You push one button in, it starts the electrics and electric fuel pump. Next, you push a momentary button, the car starts. I want to add a real keyed ignition. I took the dash off - the top switch (fuel pump/ electrics) has two wires, the bottom (momentary) has two wires. My "Painless" key ignition has the following - Ignition, Battery, Acc, and "ST" in the center. So, Do I find the constant 12v - wire that to the "Battery", One of the momentary wires goes to ignition? How do I wire this mess? I don't want to mess this up.

Is there a Year, Make , Model...Is this the OEM Ignition Cylinder you are putting in...? Maybe Classic Mini is supposed to be all the info you need...M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Brown from fuse box to batt, GREEN / WHITE is acc output, white is ign output and white /red is starter output. Oh the joys of the Bosche nibbler and 6 x 9s n the rear shelf 30yrs. ago.

howie ll wrote: Brown from fuse box to batt, GREEN / WHITE is acc output, white is ign output and white /red is starter output. Oh the joys of the Bosche nibbler and 6 x 9s n the rear shelf 30yrs. ago.

hell yea!

That was it - Worked great thanks.