vehicle wiring for toyota kr42

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / vehicle wiring for toyota kr42 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

narada000

Member - Posts: 1

Joined: January 24, 2010

Location: Sri Lanka

Posted: January 24, 2010 at 6:40 AM / IP Logged

I need to install new security system to my vehicle.

So I need wiring diagram for Toyota KR42 1999

bye

Narada Dilshan Fernando

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 24, 2010 at 4:42 PM / IP Logged

Nearly all Toyotas are the same e.g. lock and door trigger wires will be in the driver's kick panel, along with direction indicators. Ignition will be BLACK/ red, BLACK/ orange or BLACK / YELLOW and starter will be BLACK/ white. Power supply at the ignition feed will be either black, BLACK/ red white or WHITE/ red.

Just test. I've NEVER needed a crib sheet for a Toyota, over the years they have the most consistently logical set-ups I've ever seen.

The above applies from Yaris to Camry.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vehicle wiring for toyota kr42

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.