traction control

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / traction control (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rwa1015

Member - Posts: 3

Joined: July 10, 2013

Location: Virginia, United States

Posted: July 12, 2013 at 10:24 AM / IP Logged

I have 2011 Jeep Compass in my shop, the the driver and passenger air bags have been deployed because of damage to the right front. I am in the process of replacing them with the sensors and control module unplugged. When I attempted to move the vehicle after a few second of movement the traction control warning lamp comes on and the vehicle acts as though the brakes are being applied. Any suggestions or Info?

Rwa1015

awdeclipse

Copper - Posts: 285

Joined: August 05, 2007

Location: Michigan, United States

Posted: July 12, 2013 at 12:55 PM / IP Logged

How racked is the steering alignment from the damage? If the steering wheel is far off from center it is possible stability is kicking in. I know this is an issue on lifted Jeeps pre-alignment. Steering wheel position is an input to Traction/Stability control.

rwa1015

Member - Posts: 3

Joined: July 10, 2013

Location: Virginia, United States

Posted: July 12, 2013 at 1:25 PM / IP Logged

There was no steering or suspension damage at all only some damage to the radiator support and right frame rail where the bumper reinforcement attaches. I placed the steering in the straight ahead position before removing it to replace the clock spring. None of the air bag system components are "plugged in" now,

Rwa1015

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

traction control

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.