2003 Camry remote start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2003 Camry remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bjohnson

Member - Posts: 2

Joined: January 10, 2005

Location: United States

Posted: January 10, 2005 at 6:38 AM / IP Logged

I am installing a DEI 369D remote starter on a 2003 Camry LE and am having trouble finding the factory neutral safety wire. can someon help? Also, I have found general information on wiring additional relays, but would like more specifcs on the second starter wire & trunk release. Thank You.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 10, 2005 at 10:28 AM / IP Logged

Second start is @ the clutch on a manual. BLK/WHT (POS+) This is the way Astroflex does it

The trunk release is BIG blue/white (5 wire) drivers kick. You must rigger the trunk "key sence" wire at the same time as the trunk wire. Use a relay pin 86 and 87 get fused 12V 85 gets your trunk release wire from the brain.

87a gets the dash side of the trunk wire, 30 gets the trunk side of your trunk wire. BEFORE THE RELAY tap your release wire with a diode in line , take it to the trunk key sence wire...its just below the release wire in the kick. Its GRN/WHT. When you hit the trunk pop button on your remote the factory alarm will think your using the key, no need to disarm before!

bjohnson

Member - Posts: 2

Joined: January 10, 2005

Location: United States

Posted: January 11, 2005 at 6:28 AM / IP Logged

Please bare with me, I'm new at this. The car is an automatic with no factory alarm or anti-theft. The wire I'm looking for is the neutral or park safety wire from the gearshift needed to disengage the starter when the car is in gear. Also, the Rattler brain has a positive starter signal which gives direct current to the main factory start wire. On the brain, there is a light guage ribbon harness with a wire tagged "starter relay trigger" but I'm not sure of the polarity. Is this what I need to use for the second starter wire relay? Also, for the trunk release, do I still need to use the diode?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Camry remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.