pioneer avic d1 backup sensor, camera

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / pioneer avic d1 backup sensor, camera (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mickey928

Member - Posts: 3

Joined: May 15, 2007

Location: United States

Posted: May 15, 2007 at 1:45 PM / IP Logged

Looking at adding a DVD player to the car. Wanted to know if the Pioneer Avic D1 can show the DVD in CAMERA VIEW and will it be a correct picture or will it be reversed thinking that it is a camera and not a DVD player.

mickey928

Member - Posts: 3

Joined: May 15, 2007

Location: United States

Posted: May 15, 2007 at 1:49 PM / IP Logged

Have the Pionner Avic D1 installed in my 2005 Ford Mustang GT. I need to make sure I get the correct wire to get this input for the BACKUP SENSOR INPUT. Am I looking for a wire that is 12volts when backup lights are on???????

nah_zee

Member - Posts: 12

Joined: May 01, 2007

Location: United States

Posted: May 16, 2007 at 12:00 AM / IP Logged

yes it is a 12v+ wire, look for a WHITE/ yellow coming off of the sjb (smart junction box) in the passenger's kick panel. the wire should be in a gray 52 pin plug, look at pin 13... hope this helps

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pioneer avic d1 backup sensor, camera

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.