Need some help

Home / the12volt's Install Bay / General Discussion / Need some help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

april6453

Member - Posts: 2

Joined: June 29, 2003

Location: United States

Posted: June 29, 2003 at 9:04 PM / IP Logged

I am wanting to install windshield wiper lights on my 2000 Honda accord..can any one please give me step by step instructions or refer me to a sire that will for free. I have absolutly no electronic experience.

Maxst

Silver - Posts: 866

Joined: June 06, 2003

Location: United States

Posted: June 29, 2003 at 9:15 PM / IP Logged

need to get a swtich...route a 12V wire to the switch-and have a fuse...take your power leads from the lights attach it to the switch.then ground the switch..then in the engine compart ment find a good grounding spot and take the two grounds from the lights and ground them.

to install undo the orginal sprayers and drop the neon ones in FIRST B4 YOU WIRE EVERYTHING!!

Word of caution..they are very illegal and i wouldnt even try to have them on when your moving...you will get pulled over...ticketed maybe..that depends on the cop.

I need quality equipment, feel free to donate.

april6453

Member - Posts: 2

Joined: June 29, 2003

Location: United States

Posted: June 29, 2003 at 9:18 PM / IP Logged

Thank you from all of the officers I have talked to in my area as long as I dont use red or blue there is nothing they can do about the lights. I appreciate the help:)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need some help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.