Command Start

Home / the12volt's Install Bay / General Discussion / Command Start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

majorj13

Member - Posts: 12

Joined: December 28, 2002

Location: Canada

Posted: January 06, 2003 at 10:07 AM / IP Logged

I have a CS 290i-c That I installed last week and starts the car great thanks to Jeff, But I can not get the locks to work, I found the correct wires and I have spliced into the door panel right at the switch, So I know I have the right wire, When I bush the CS button all that happens is the lights flash. The Car I installed it on is a 1992 Oldsmobile Cutlass Cierra, I was wondering if the locks not working had something to do with the car having automatic locks? When the car is put into gear the doors lock. Any help would be greatly appreciated.

Thanks in advance

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: January 06, 2003 at 11:41 AM / IP Logged

There is a door lock relay on the passenger side kick panel. There will be a black and a blue wire one at each end of this relay. Blue is lock Black is unlock. Your Command start has a reversing polarity door lock outputs. You should be able to connect the wires directly to these two wires and it should work.

majorj13

Member - Posts: 12

Joined: December 28, 2002

Location: Canada

Posted: January 06, 2003 at 11:45 AM / IP Logged

Thanks I 'll give it a try, and let ya know

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Command Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.