led instrument cluster lighting

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / led instrument cluster lighting (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ludacrisvp

Member - Posts: 12

Joined: December 20, 2007

Location: Minnesota, United States

Posted: August 31, 2008 at 11:51 PM / IP Logged

Hello,

I have a 2001 Monte Carlo SS that I have upgraded to LED lighting in the HVAC and Instrument cluster because most of the old lamps were burnt out.

About 6 months ago I replaced the ones in the HVAC area with these LEDs

I have had no issues with them in the HVAC area they have an inline 440 ohm resistor added to each one.

I then decided to replace the ones in my instrument cluster about 2 months ago and it has been working fine until recently.

There is one LED out of 12 that decided to start flashing rapidly about 3 days ago any ideas as to what is causing this?

ludacrisvp

Member - Posts: 12

Joined: December 20, 2007

Location: Minnesota, United States

Posted: August 31, 2008 at 11:53 PM / IP Logged

Since I cannot edit my post I want to say that they are 470 Ohm resistors not 440.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

led instrument cluster lighting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.